EMC CLARiiON AX150 Series Installationsanleitung PDF herunterladen (Seite 30)

Installation

EMC AX150-Series Integrated Management Software Release Notes

For a storage system managed with Navisphere Express

Follow the instructions in VMware ESX Server chapter in the EMC

Installation Roadmap for CX3-Series, CX-Series, AX-Series, or FC-Series

Storage Systems with the following exceptions:

 Install the Navisphere Initialization Utility and Navisphere Server

Utility from the AX-Series Server Support Products CD that shipped

with the storage system. Follow the instructions for Linux in the

Getting Started - AX150/AX150SC guide to install and run these

utilities on the ESX Server Console OS (COS).

 Skip the step on installing admhost because SAN Copy/E is not

supported for Navisphere Express.

 Do not upgrade the storage system to Navisphere Manager.

 Skip the step on installing software enablers because they are not

needed for Navisphere Express.

 Use Navisphere Express instead of Navisphere Manager to configure

the storage system as follows:

• Create a hot spare.

• Create one or more disk pools.

• Create one or more virtual disks on the disk pools.

• Assign one or more disks to the ESX Server.

 Use Navisphere Express to set up Event Notification in place of

setting up Event Monitor with Navisphere Manager.

For a storage system with Navisphere Manager

Follow the instructions in the VMware ESX Server chapter in the EMC

Installation Roadmap for CX3-Series, CX-Series, AX-Series, or FC-Series

Storage Systems.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Keine Kommentare

EMC CLARiiON AX150 Series Installationsanleitung Seite 30