EMC QLogic Installationsanleitung Seite 4
- Seite / 150
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
EMC Fibre Channel and iSCSI with QLogic Host Bus Adapters in the Windows Environment
4
Contents
Chapter 2 Miscellaneous Planning and Procedures
Zoning and connection planning in a fabric environment......... 90
Installing and configuring the QLogic QLA4010 iSCSI
HBA (TOE)......................................................................................... 91
Using the QLogic iSCSI SANsurfer application to
configure iSCSI devices ............................................................ 91
Configuring iSNS settings for QLA4010 ................................ 93
Booting from SAN with QLogic QLA40xx and
Microsoft Initiator............................................................................. 99
Boot-from-SAN configuration restrictions.................................. 109
Benefits of booting from the storage array .......................... 109
Setting up external boot for IBM BladeCenter server
HS40 (8839) ...................................................................................... 110
Configuring an HS40 BladeCenter server to boot
from an external array ............................................................ 110
Blade server restrictions ......................................................... 111
Manually installing the HBA driver – Advanced users............ 112
Driver revision......................................................................... 112
Where to find the driver......................................................... 113
Windows 2003 STORPort updates........................................ 114
Migrating Windows 2003 drivers from SCSI to STOR....... 114
Manual driver installation procedure for Windows 2000,
2003, or Windows 2008 hosts................................................. 115
Updating the HBA driver in a Windows 2000, 2003, or
Windows 2008 hosts................................................................ 117
Upgrading to Windows 2003 from Windows 2000............ 119
Editing the Windows time-out value ................................... 120
QLogic advanced utilities.............................................................. 121
Updating QLogic firmware/BIOS and applying NVRAM
settings ...................................................................................... 121
Updating the flash BIOS using SANsurfer FC HBA
Manager.................................................................................... 122
Procedure for replacing a QLogic HBA in Stratus ftServers
without rebooting ........................................................................... 125
EMC CLARiiON storage arrays............................................ 125
EMC Symmetrix arrays with device masking enabled...... 126
Special instructions for the EMC CLARiiON CX200 series...... 128
Set the HBA FC-AL loop ID................................................... 128
Direct-connect dual-host clustering configurations........... 130
- Windows Environment 1
- Contents 3
- Chapter 3 Troubleshooting 5
- Courier italic 15
- Installation and 17
- Configuration 17
- How this guide works 18
- Verify Array/LUN 19
- Visibility for Boot 19
- Installing the HBA 20
- STOP: 0X0000007B 21
- HBA edge connecters 23
- PCI Express slots 24
- PCI Express slots aligned 24
- QLogic banner 29
- Main Fast!UTIL options window 30
- Configuration Settings window 30
- Adapter Settings window 31
- Enter 34
- Warning dialog 35
- Fast!UTIL Options window 36
- Firmware boot manager menu 38
- refer to memory ramdisks 39
- QLogic directory 41
- EFIutil.efi 41
- QLogic efiutil all upgrade 43
- QLogic Fibre Channel drivers 45
- Driver handle numbers 46
- -s 5f 62 46
- Edit adapter settings 47
- Connection option 48
- Figure 32 Options set 50
- RAMDISK 51
- Windows 52
- HBA selection screen 57
- Windows setup screen 58
- Base article Q240672.) 59
- Existing partitions 59
- Windows Boot Manager 62
- Windows Setup screen 62
- Windows Install screen 63
- Loading driver screen 66
- Browse for Folder screen 67
- A as shown in Figure 47 67
- Install Windows screen 70
- Pre-installation guidelines 71
- Driver installation/upgrade 72
- SANsurfer driver selection 74
- Post-installation procedures 78
- SANsurfer HBA install wizard 79
- Show SAN 82
- SANsurfer icon 83
- Connect to the host 84
- ServerManager: 85
- <sp_IP> 88
- <storagegroupname> 88
- Miscellaneous 91
- Planning and 91
- Procedures 91
- Download Firmware dialog box 97
- F1 to enter the server BIOS 112
- Enter. This boot device 112
- Blade server restrictions 113
- Driver revision 114
- Where to find the driver 115
- Windows 2003 STORPort updates 116
- STORPort drivers 117
- A:\, for 120
- QLogic advanced utilities 123
- Utilities tabbed page 125
- EMC CLARiiON storage arrays 127
- Set the HBA FC-AL loop ID 130
- Reconfigure the HBA jumper 133
- Troubleshooting 135
- Volume sizes 136
- Host after the rebooted 141
- Known issues 142
- Problems and solutions 143
- Problem 4 144
- Problem 5 144
- Problem 6 144
- Problem 7 145
- Problem 8 145
- Problem 9 145
- Third-Party Software 147
- SANsurfer version history 148
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.043 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern