EMC QLogic Installationsanleitung PDF herunterladen (Seite 41)

Verifying and configuring the BIOS settings

Installing and Configuring the BIOS Settings

* The WWNN of the server's boot LUN must be listed in this field.

Note: The QLogic driver may override the EMC-recommended NVRAM

values. Unless otherwise specified, use the default implemented by the

driver.

The values for the Connection Options parameter are as follows:

◆ 0 for Loop Only

◆ 1 for Point-to-Point

◆ 2 for Loop preferred, otherwise Point-to-Point

Enable LIP Full Login Yes Yes Yes

Enable Target Reset Yes Yes Yes

Port Down Retry Count 8 45 30

Link Down Timeout 15 45 15

Extended Error Logging Disabled • Disabled (Do not use

debugging)

• Enable (Use debugging)

• Disabled (Do not use

debugging)

• Enable (Use debugging)

Operation Mode 0 0 0

Interrupt Delay Timer 0 0 0

Selectable Boot settings

Selectable Boot Disabled Disabled Disabled

(Primary) Boot Port Name, LUN WWNN* WWNN* WWNN*

Boot Port Name, LUN 0 0 0

Table 3 QLogic BIOS settings for Fibre Channel HBAs (page 2 of 2)

EMC recommended settings

QLogic default No Multipath functionality With Multipath functionality

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 215 216

Keine Kommentare

EMC QLogic Installationsanleitung Seite 41