EMC QLogic Installationsanleitung PDF herunterladen (Seite 170)

170

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment

Configuring a Boot Device on an EMC Storage Array

• If there are multiple QLogic HBAs, a list of addresses occupied

by those HBAs appears. Since the EMC storage array is

attached to the lowest-numbered PCI slot, select the first

adapter from the list; then press ENTER. The Fast!UTIL

Options menu appears.

4. From the Fast!UTIL Options menu, select Configuration

Settings and press ENTER.

5. From the Configuration Settings menu, select Adapter Settings

and press ENTER.

6. From the Host Adapter Settings menu, select Host Adapter

BIOS and press ENTER to enable it if it is not already enabled.

Note: Refer to “EMC recommended NVRAM settings for Linux” on

page 37 for recommended settings.

7. Press ESC to exit the Configuration Settings menu.

8. From the Configuration Settings menu, select iSCSI Boot

Settings and press ENTER.

9. From the iSCSI Boot Settings menu, select Primary and press

ENTER to enable this option if it is not already enabled.

The adapter will scan for attached storage devices which will be

displayed on the screen.

10. Choose the Symmetrix storage array port from which the system

will boot. A list of LUNs will be displayed in a new window.

Select the LUN to be used as the boot device and press ENTER.

Note: On Symmetrix storage arrays, the LUN number of the first visible

device to that port should be used.

11. Select iSCSI Boot and press ENTER to enable boot.

12. Select Primary Boot Device Settings and press ENTER to review

the selected primary device for boot.

13. Press ESC in the Primary Boot Device Settings menu to return to

the iSCSI Boot Settings menu.

14. Press ESC in the iSCSI Boot Settings menu to return to the

Configuration Settings menu.

15. Press ESC in the Configuration Settings menu to return to the

Options menu.

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 215 216

Keine Kommentare

EMC QLogic Installationsanleitung Seite 170