EMC QLogic Installationsanleitung PDF herunterladen (Seite 64)

Configuring a Boot Device on an EMC Storage Array

◆ Booting from the SAN requires the use of a Navisphere

Management station with the Navisphere Manager or NaviCLI

installed. The stations must be separate from the boot server, but

networked to the CLARiiON Storage Array.

Symmetrix-specific limitations:

◆ When attached to a Symmetrix, the physical-to-logical split must

be 1:8 or less (1:7, 1:6, etc.). EMC supports the use of any LUN

from 00 through FF as a boot disk.

◆ Prior to the installation on a Symmetrix LUN, the Linux host HBA

must have successfully logged into the array. Using Solutions

Enabler from another system, assign a minimum of one LUN to

the host.

◆ During the installation procedure, it is recommended, but not

required, that only one LUN be assigned to the host for ease of

use. Once the installation has completed, additional LUNs may

be assigned to the host.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 75 76

Keine Kommentare

EMC QLogic Installationsanleitung Seite 64