EMC QLogic Installationsanleitung PDF herunterladen (Seite 20)

Installing and Configuring the QLogic HBA and v8.x-Series Driver

c. Click the EMC link below OEM Models.

d. Find the NVRAM file for the HBA(s) in your system, and click

the associated Download link to save the file.

2. The file is a self-extracting .zip file that must be extracted to a

bootable floppy diskette, as follows:

a. Insert a diskette into a Microsoft Windows 9x machine.

b. Open any DOS window.

c. At the DOS prompt, format the diskette by entering:

format /s a:

d. At the DOS prompt, change directory (cd) to the location of

the saved zipped file, then extract the file to the diskette.

Note: The QLogic HBA(s) must be installed in the host before

proceeding.

3. Insert the BIOS upgrade installation diskette into the floppy

drive.

4. Reboot the host.

5. After the host has rebooted, a DOS prompt appears. Type

flasutil /L /F and press ENTER.

Note: The HBA BIOS upgrade might take a few minutes.

6. After the upgrade is complete, remove the diskette and reboot the

host. During startup, the QLogic banner should display the new

BIOS version.

EMC recommended HBA BIOS settings

EMC requires configuring the QLogic BIOS settings with the

EMC-approved NVRAM settings file. This file contains all of the

BIOS settings for the QLogic adapters that have been tested and

approved for connection to EMC storage arrays.

Refer to the EMC Support Matrix for required NVRAM versions for

qualified HBAs.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 75 76

Keine Kommentare

EMC QLogic Installationsanleitung Seite 20