EMC Qlogic QLA22xx Installationsanleitung PDF herunterladen (Seite 26)

Symmetrix Fibre Channel with Qlogic HBAs on Linux Hosts

Arbitrated Loop Configurations

4. Go to the end of the BLIST_NOLUN list and add the device. For

example, in the case of the NEC ExpressServer 5800 120Ra2, the

entry would be similar to the following:

{"NEC", "GEM312R2-G7CGQ", "4.1a", BLIST_NOLUN}, /*Reports back

incorrect LUNs*/

5. After this addition is made, proceed to Configuring and Compiling

the Kernel.

Configuring and

Compiling the

Kernel

If this is a new installation, proceed to New Installation later on this

page. If this is an upgrade to a newer kernel revision, go to Kernel

Upgrade on page 29.

New Installation Follow these steps to configure the host in a new installation:

1. Prior to configuring the kernel, change to the appropriate

directory:

cd /usr/src/linux

2. Configure the kernel:

make config/menuconfig/xconfig

3. From the main menu, select the Processor type and features

menu.

a. Select the appropriate Processor family for the processors in

the system:

– 386

– 486/Cx486

– 586/K5/5x86/6x86

– Pentium/K6/TSC

– PPro/6x86MX/PII

– PIII/Xeon/Deschutes

b. Enable Symmetric multi-processing support as static only if

the system being used has multiple processors.

c. Select <Exit> to return to the Main Menu.

4. From the main menu, select the SCSI support menu (Figure 2 on

page -27).

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 75 76

Keine Kommentare

EMC Qlogic QLA22xx Installationsanleitung Seite 26